01
Lane Departure Warning
Monitors lane markings and may alert the driver when the vehicle begins moving out of its lane.
Professional ADAS recalibration helps ensure your vehicle’s cameras, sensors and driver-assistance features operate accurately after windshield replacement.
Many modern vehicles use a forward-facing camera mounted to or near the windshield. Even a small change in camera position can affect how accurately the vehicle reads lane markings, traffic, road conditions and nearby objects.
After windshield replacement, BEAM Auto Glass follows vehicle-specific procedures to recalibrate applicable cameras, sensors and driver-assistance systems.
Recalibration is completed according to the requirements for your vehicle’s year, make, model and equipment.
Specialized diagnostic and targeting equipment is used when static recalibration is required.
We identify whether your vehicle requires static, dynamic or combined recalibration.
Diagnostic scans and verification help confirm that the recalibration was completed successfully.
Depending on the vehicle, the forward-facing camera may provide information to several driver-assistance systems.
Monitors lane markings and may alert the driver when the vehicle begins moving out of its lane.
Helps identify a potential collision with a vehicle or object ahead and may provide an alert.
May apply braking assistance when the vehicle detects an imminent frontal collision.
Helps maintain a selected following distance by responding to the speed of traffic ahead.
Uses the camera to identify certain road signs and display information to the driver.
May provide steering assistance to help keep the vehicle centered within recognized lane markings.
Recalibration may be required whenever a repair, replacement or vehicle event affects the position, view or operation of an ADAS camera or sensor.
Removing and installing a windshield can change the position or viewing angle of a windshield-mounted camera.
Recalibration may be required when a camera or related component is removed, disconnected or repositioned.
Vehicle repairs, suspension changes or collision damage can alter the alignment of cameras and sensors.
A dashboard warning, diagnostic code or improperly functioning system may indicate that service is needed.
The correct procedure depends on the vehicle manufacturer, camera system and equipment installed on the vehicle.
Static recalibration is completed while the vehicle remains stationary and is positioned in relation to specialized targets.
Dynamic recalibration is completed while driving the vehicle under specific road, speed, traffic and weather conditions.
Some vehicles require both a controlled static procedure and a dynamic road-based procedure.
We review the vehicle requirements, perform the correct procedure and verify the system before the vehicle is returned to you.
We use the VIN and vehicle information to identify the required manufacturer procedure.
A pre-service scan identifies applicable fault codes and confirms the systems communicating with the vehicle.
The required static, dynamic or combined procedure is completed using vehicle-specific instructions.
We complete post-service verification and provide applicable recalibration documentation.
When you choose BEAM Auto Glass for windshield replacement, we can identify the vehicle’s ADAS requirements and complete the required recalibration as part of the same service process.
This eliminates the need to arrange a separate dealership or repair appointment after the new windshield has been installed.
View Windshield ReplacementOur recalibration service is designed to help restore system accuracy while making the windshield replacement process easier.
Our technicians receive ongoing training in windshield-mounted cameras and modern driver-assistance systems.
We follow the applicable procedure for the vehicle’s camera, windshield and safety-system configuration.
Specialized targets, diagnostic tools and measurement procedures are used when required.
Pre- and post-service scans help identify fault codes and verify communication with applicable systems.
Applicable documentation is provided after the recalibration has been completed and verified.
We can provide recalibration information and documentation needed for qualifying windshield claims.
When ADAS recalibration is required after a covered windshield replacement, it may be considered part of the replacement service. Approval depends on your policy, insurance provider and supporting documentation.
BEAM can provide vehicle information, recalibration requirements and service documentation for the claim.
BEAM Auto Glass provides windshield replacement and ADAS recalibration throughout York, Lancaster and Chester Counties, along with nearby communities in North Carolina.
View All Service AreasADAS stands for Advanced Driver-Assistance Systems. These systems can include lane-departure warnings, forward-collision alerts, adaptive cruise control and automatic emergency braking.
A forward-facing camera may be mounted to the windshield. Removing and replacing the glass can change the camera’s position or viewing angle, so recalibration may be required to restore accuracy.
No. Recalibration depends on the vehicle and equipment installed. Vehicles without windshield-mounted cameras may not require the service.
Static recalibration uses specialized targets while the vehicle is stationary. Dynamic recalibration is completed while driving under manufacturer-specified road and speed conditions.
Service time depends on the vehicle, required procedure, road conditions and whether static, dynamic or combined recalibration is needed.
In many cases, yes. BEAM can identify the recalibration requirements before the appointment and complete the service as part of the windshield replacement process.
It may be covered when required as part of an approved windshield replacement claim. Coverage depends on your policy and insurance provider.
Send us your vehicle information or VIN. We’ll identify the applicable procedure and arrange the windshield and recalibration service your vehicle requires.